> So I'm heading down to the local 1/8" mile track this weekend to see what my
> stock Max will so. Being a newbie to the strip I am open to all suggestion. Any
> tips or techniques ya'll have to offer be appreciated.
> What about gas? Should I just dump in 93 at the pump or would a stock V-max
> take advantage of something like CAM2?

Just put good 93 pump gas in it.  If you use something like CAM2 (?) or
higher octane
gas, you will actually slow the bike down.  The higher the octane
rating, the slower
the fuel burns.  This is necessary for high compression engines, to keep
combustion
temp down and to avoid preignition and detonation.  I have seen these
results at
the track and on the dyno.  2hp loss on 114 octane fuel on the dyno, .2
seconds in
the 1/4 mile.  (on a stock bike) I'd say run a mid-grade fuel for even
more power, but 
I can't verify that it will make the bike any faster...just that high
octane fuel will 
slow it down.

Besides, I have no idea how those octane improving fuel additives work,
or if they work.

- -- 
Justin Lassy
(V)Maximum Performance Motorcycle
mailto:Vmaxtuner@earthlink.net