Subject: Re: down she goes

Take off the lower swing arm caps, both sides; remove nuts, take flat
washer along with a 4 inch piece of new exhaust tubing cut down the
middle lengthways, 2 pieces one for each side, have the original washers
from the bike mig welded to the half tubing, put a little ATV under the
now  fabricated foot pegs, torque to specs 70 lbs you can lay the bike
over,,, nothing touches but your foot peg  I painted mine flat black
they have served me well,  About a year go I wanted to sell these  for
twenty nine bucks, there were no replys, UNBELIEVEABLE.